GPU-16 gas turbine pumping unit

The retrofit of GPU-16 gas turbine pumping unit by replacing the DG59L2 engine with GTU-16P gas turbine provides modernization of the GPU-16 set to improve its operational performance.

The differences of GTU-16PT retrofit from the GTU-16P gas turbine base design are determined by the component set and specific conditions of tie-in and arrangement of gas turbine set components with the purpose of serviceability of the upgraded GPU-16 gas turbine pumping set.

For the GPU-16 retrofit the hardware set and GTU-16PT gas turbine are installed on the existing foundation, into existing enclosure with the upgrading of the GPU-16 gas pumping systems.

When developing the GPU-16 retrofit project with GTU-16PT gas turbine, the minimization of upgrading of the existing systems is stipulated. The hardware set provides upgrading of the gas pumping systems for the GTU-16PT gas turbine, and also replacement or upgrading of the out-of-date or worn-out systems of the set and it is determined by the specification approved by the Customer.

Automatic control unit (ACU) is based on SKU-SS 4510-10-38, and common for gas pumping units and other gas turbine mechanical drive systems.

Primary Performance Data
ISO Conditions, loss-free, fuel: Methane (LHV=11958 kCal/kg)    
 Power turbine shaft output, MW16.47
Efficiency at power turbine shaft, % 37.0
Exhaust gas temperature, °466
Output speed, rev/min 5300
Exhaust gas flow, kg/s 57.2
Service life:
-overhaul interval, hr
-design life, hr
25 000
100 000


The retrofit of GPU-16 gas turbine pumping unit with substitution of the DG59L2 engine for GTU-16PT gas turbine provides GPU-16 modernization to improve its performance, that is:

  • to improve driven engine reliability;
  • to improve reliability of the modified systems;
  • to reduce the consumption of fuel gas;
  • to reduce irretrievable losses of lube oil;
  • to improve the ecological characteristics.

The retrofit is carried out with maximum use of existing systems of the unit.

Work Experience

The set for Tyumentransgaz's Novokomsomolskaya CS retrofit has been manufactured.

Perm gas turbines can be incorporated in different facilities.

If you need a more detailed information about where our gas turbine equipment is used, please see the REFERENCE LIST or contact persons below.

If you are interested in our equipment, please fill in the questionnaire.


93, Komsomolski prospect, Perm, 614990, Russia.

Mikhail A. Ignatiev
JSC "UEC-Perm Engines"
Deputy Commercial Director-
Director Industrial Gas Turbines Program
Tel: +7 (342) 2409-444
Fax: +7 (342) 240-92-47

Mikhail F. Kharullin
Deputy General Designer-
Chief Designer of Gas Turbine Drives
for Pumping Sets and
Facilities of Their Application
l.: (342) 281-48-99
Fax: (342) 281-54-77

Andrei L. Polyanin
Head of the Leading dept.
l.: (342) 240-97-89
Fax:  (342) 281-54-77